SuperAdmin
UV Systems
LID PLACER with UV Lid Sterilization: Automatically places plastic lids onto pails. Continuous motion. Manual lid magazine.
Effectiveness of Ultraviolet (UV) Sanitation Systems is by killing unwanted bacteria particles. Ultraviolet light is considered germicidal due to its ability to effectively eliminate bacteria. Without getting too into specifics, UV radiation earns this classification by emitting a wavelength that falls between 200 and 300 nanometers. When light that exists in that spectrum is shined on bacteria, viruses, and other pathogens, it deactivates their DNA, destroying their ability to multiply and killing them.
- Container Size 2-1/2 to 7-gallon Pails
- Output 25 per Minute Maximum
- Pneumatic Requirements 80-110 P.S.I. – 3 C.F.M. @ 35-105 degrees F
- Electrical Requirements Not Required
Data Scale’s Lid Placer cuts costs and increases efficiency by eliminating the need to manually pry, pick, position, and place lids on pails. Operating at speeds up to 80 lids/minute the Data Scale Lid Placer adjusts to handle a wide variety of different size and shape containers. The Data Scale Lid Placer integrates with our high-speed Roll Through Lid Press for optimum throughput and minimal labor.
*Available UV Pail Sanitation System Feature
UV Systems
Lid Presses
DataScale provides a variety of lid presses depending on your filling system’s needs. The Semi-Automatic Lid Press (SALP), Automatic Lid Press (ALP), and Roll-Through Lid Press (RTLP) are available to order to work in your custom pail filling system. Each product will vary in size, output, and electrical and pneumatic requirements so make sure to visit the individual product pages below or get in contact with one of our knowledgable sales professionals who can help you get matched with the product that will suit your needs. Simply click “Get a Quote” below!
Lid Presses
Gallery
Lid Placers
LID PLACER: Automatically places plastic lids onto pails. Continuous motion. Manual lid magazine.
- Container Size– 2-1/2 to 7-gallon Pails
- Pneumatic Requirements– 80-110 P.S.I. – 3 C.F.M. @ 35-105 degrees F
- Output– 25 per Minute Maximum
- Electrical Requirements– Not Required
Data Scale’s Lid Placer cuts costs and increases efficiency by eliminating the need to manually pry, pick, position, and place lids on pails. Operating at speeds up to 80 lids/minute the Data Scale Lid Placer adjusts to handle a wide variety of different size and shape containers. The Data Scale Lid Placer integrates with our high-speed Roll Through Lid Press for optimum throughput and minimal labor.
Lid Placers
Gallery
Denesters
Pail Denesters
- Automatically separates up to 24 pails per minute from the stack and places them, one at a time, onto filler conveyor.
- Holds up to six stacks of pails.
- Pail stacks manually loaded onto stack loader/tilt mechanism.
- Power stack tilt mechanism via toggle switch.
- Operator manually pushes stack onto stack feeder conveyor.
- Featuring Allen-Bradley Micro 850 PLC.
- Panel View C600 six inch touch screen.
Container Size *2.5 to 6-gallon Pails
Output 20 to 24 Containers per Minute
Electrical Requirements 240 VAC ±10% 47 to 63 Hz 3 Am
Pneumatic Requirements 80 to 110 P.S.I. -12 C.F.M. @ 35 to 105 degrees F
Denesters
Gallery
5504 M Series
Net Weight Drum Filler. Featuring Data Scale’s electronic/pneumatic control console and automatic filling program with dribble/fast/dribble, auto tare, operator prompting/fill status, no-fill/fail-safe for no container, lance misalignment, and lance down interlock. Also operator control of fill; jog, pause, abort, flush, and emergency stop.
- Container Size: 15, 30, 55 Gallon Drum
- Output: 20-70 Drums Per Hour (Depending on Container, Product, and Model)
- Accuracy: ± .1 LBS – .5 LBS Depending on Model
- Electrical Requirements: 115 VAC ±10%, 60 Hz, 3 Amp
- Pneumatic Requirements: 70-100 P.S.I., 3 C.F.M., @ 35-105 degrees F
- Scale: 48” by 48” 5,000 lb. Capacity and 100% overload. Calibrated to 5,000 lb. by 0.5 lb. Meets NTEP class III requirement.
Available Options: Wetted Parts Options, Explosion Proof Package, N2 Container Purge, Steam Jacketed Manifold, Container Sensor, Drum Filling Option, Fume Hood, Clean Room Special Fill Head, Container Grounding, Harsh Environment Package, Top Fill Conversion, Scale Conveyor Options, Pump Control.
5504 M Series
Gallery
5504 A Series
A four lance automatic sequential top-surface or sub-surface liquid filling system for four pre-palletized 55 gallon drums.
- Container Size: 15, 30, 55 Gallon Drum
- Output: 20-70 Drums Per Hour (Depending on Container, Product, and Model)
- Accuracy: ± .1 LBS – .5 LBS Depending on Model
- Electrical Requirements: 115 VAC ±10%, 60 Hz, 3 Amp
- Pneumatic Requirements: 70-100 P.S.I., 3 C.F.M., @ 35-105 degrees F
- Scale 48” by 48” 5,000 lb. Capacity and 100% overload. Calibrated to 5,000 lb. by 0.5 lb. Meets NTEP class III requirement.
Available Options: Fume Hood, Clean Room Special Fill Head, Container Grounding-Manual, Harsh Environment Package, Top Fill Conversion, Scale Conveyor Options, Pump Control, Wetted Parts Options, Explosion Proof Package, N2 Container Purge, Steam Jacketed Manifold, Container Sensor, Drum Filling Option, Stainless Steel Fill Head.
5504 A Series
Gallery